Recall Z-0430-2026— CareFusion 303, Inc.

Name: FDA recall Z-0430-2026
Creator: U.S. Food and Drug Administration
Published: 2025-10-17

Class I · Ongoing

Class I FDA medical device recall by CareFusion 303, Inc., initiated 2025-10-17. It names one FDA 510(k) clearance: K211218. Product: BD Alaris infusion Pump Module 8100, REF: 8100; KIT, BEZEL ASSY 8100BD, REF: 49000437; KIT ASSY ONE PIECE BEZEL 8100, REF: 49000270. Used with the following new and updated documents: BD Alaris Infusion System Inspection Safety Reminder, Part: BD-163124, Revision: 00; Cleaning and Disinfecting Procedure, Part: P00000864; Cleaning and Disinfecting Quick Reference Guide. Reason: If infusion pump is dropped or severely jarred this may damage the pump module bezel assembly, which can cause under-infusion, over-infusion, unregulated flow, or pump module failure to calibrate; so dropped/jarred pumps should be removed from use, tested, and inspected by qualified service personnel prior to reuse; tip sheet, cleaning and disinfecting procedure and reference guide updated..

Recalling firm: CareFusion 303, Inc.
Classification: Class I
Status: Ongoing
Initiated: 2025-10-17
Firm location: San Diego, CA, United States

510(k) clearances named in this recall

1 on FDA's record

K211218 — BD Alaris System with Guardrails Suite MX v12.1.2Carefusion 303, Inc.·cleared 2023-07-21

K-numbers as listed on FDA's Recall Enterprise System record for this event (openFDA device/recall k_numbers). The recall may also cover devices cleared under other submissions not named here.

Product description

BD Alaris infusion Pump Module 8100, REF: 8100; KIT, BEZEL ASSY 8100BD, REF: 49000437; KIT ASSY ONE PIECE BEZEL 8100, REF: 49000270. Used with the following new and updated documents: BD Alaris Infusion System Inspection Safety Reminder, Part: BD-163124, Revision: 00; Cleaning and Disinfecting Procedure, Part: P00000864; Cleaning and Disinfecting Quick Reference Guide

Reason for recall

If infusion pump is dropped or severely jarred this may damage the pump module bezel assembly, which can cause under-infusion, over-infusion, unregulated flow, or pump module failure to calibrate; so dropped/jarred pumps should be removed from use, tested, and inspected by qualified service personnel prior to reuse; tip sheet, cleaning and disinfecting procedure and reference guide updated.

Data sourced from openFDA. This site is unofficial and independent of the FDA.